Channel induction furnaces for melting of cupper and cupper alloys

Tilting Channel induction furnaces for melting of cupper and cupper alloys.

The furnaces are suitable for production of cupper alloys (brass, bronze). They are remarkable for their big productivity and law consumption of power supply. The furnaces are equipped with removable inductors and air cooling.

 

Type	Working capacity (kg)	Productivity brass(kg/h)	Power(kW)
TE 90H2	2000	320	90
TE 120H2	2000	520	120
TE 160H3	3000	600	160
TE 250H4	4000	1000	250
TE 750H6	6000	3000	750
TE 750H15	15000	3000	750

Stationary channel induction furnaces for melting of cupper, brass and bronze

The furnaces have induction eating on an industrial frequency. They are suitable for melting of non-ferrous metals’ waste, smelting, working with die casting machines, gravity die casting, casting in moulds.

The furnaces consist of two chambers, joined by a heating channel. The metal is being taken through casting ladles or through automatic device.
The advantages of these furnaces are as follows::

• Low consumption of power supply thanks to the excellent heating isolation
• Identical temperature of the metal in the chambers
• Possibility for simultaneous charging of one of the chambers and taking away of the liquid metal from the other
• No working break
• Optimal use of the casting machines
• No metal overheating
• Low service expenses

Type	Working capacity (kg)	Productivity brass(kg/h)	Power (kW)	Specific consumption of power supply (kWh/kg brass)
TE 13-65С	1000	220	65	0,27
TE 13-90С	1500	320	90	0,24
ТЕ 13-120С	1800	450	120	0,23
TE 13-160С	2000	600	160	0,22